Reading Data Stored In Memory; Clearing Memory; Canceling Auto-Power Off; Maintenance - Fluke 1630 User Manual

1630
Users Manual

Reading Data Stored in Memory

F
1. Press
location appears on the upper display and the stored data appears on
the lower display. Figure 7 shows the stored data display.
2. Press E or D to go to the next or previous memory location. The
memory location rolls over when the first or last record is reached.
NO.

Clearing Memory

To clear the memory press and hold
CL appear on the display and indicate that memory is cleared.

Canceling Auto-Power Off

When the Clamp is turned on, the letters AP appear on the display and indicate
that Auto-Power Off is turned on. To cancel Auto-Power Off, press
then turn the Clamp on. The letters AP will no longer appear on the display.

Maintenance

To avoid possible electric shock or personal injury, repairs
or servicing not covered in this manual should be
performed only by qualified personnel.
12
until NO. appears on the display. The current memory
Figure 7. Stored Data Display
XWWarning
NO.
R
and then turn the Clamp on. The letters
eht08f.eps
F
and