Viewing Memory Data - Fluke 187 User Manual

Viewing Memory Data

Use the following procedure to view memory data:
Note
Viewing memory data involves turning the rotary
switch from its current function. Selections are
not retained when you turn the switch. To return
the meter to this function after viewing memory
data, note the function and the enabled
selections before you turn the rotary switch.
1. Disconnect the input leads at the measurement
source.
WWarning
To avoid electric shock, disconnect the test
leads at the measurement source prior to
viewing memory data.
2. Turn the rotary switch to the VIEW MEM position.
Using Memory & Communications Features
3. The primary display shows memory data. Refer to
Figure 4-1 for an explanation of the VIEW MEM
display.
4. If the primary display data is a logged reading,
appears in the display. You can switch between the
two types of memory data.
Press (SAVE) for saved reading.
Press (LOGGING) for logged reading
To view more detailed logged reading information,
use FlukeView Forms software.
5. The index (lower left corner of the display) identifies
the displayed memory data by number. You can view
additional memory data by pressing
6. Repeat steps 4 and 5 to switch between the two types
of memory data.
7. To exit viewing memory, turn the rotary switch to any
other position. Remember that the meter returns to
the default selections for the new function position.
4
Viewing Memory Data
and .
4-3