Fluke 106 User Manual
Hide thumbs
Also See for 106:
- User manual (436 pages) ,
- Specifications (6 pages) ,
- User manual (33 pages)
Related Manuals for Fluke 106
Summary of Contents for Fluke 106
- Page 1 106 & 107 Digital Multimeters Users Manual PN 4343876 June 2013 © 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
- Page 2 LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This war- ranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
-
Page 3: Table Of Contents
Table of Contents Title Page Introduction ........................1 Safety Information ......................1 Safe Working Practices ....................1 Instrument Overview ...................... 5 Terminals ........................5 Display ........................5 Auto Power Off ....................... 6 Auto Backlight Off ......................6 Measurements........................ 6 Data Hold ........................6 Measure AC and DC Voltage .................. - Page 4 106 & 107 Users Manual General Maintenance ....................11 Test the Fuse ......................12 Replace Batteries and the Fuse ................13 Service and Parts ......................13 General Specifications ....................14 Accuracy Specifications ....................15...
-
Page 5: Introduction
Introduction Safety Information The Fluke 106 and 107 Multimeters (the Product) are The Fluke 106 and 107 comply with IEC 61010-1 CAT III 6000 count instruments. 600 V overvoltage standard. See Specifications. The Product is battery powered with a digital display. - Page 6 106 & 107 Users Manual • Warning Use only correct measurement category (CAT), voltage, and amperage rated To prevent possible electrical shock, fire, or probes, test leads, and adapters for the personal injury: measurement. • Carefully read all instructions. •...
- Page 7 Digital Multimeters Safe Working Practices • • Do not use test leads if they are Remove the batteries if the Product is damaged. Examine the test leads for not used for an extended period of time, damaged insulation and measure a or if stored in temperatures above 50 °C.
- Page 8 Product Category: With reference to the equipment types in the WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation" product. Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling information.
-
Page 9: Instrument Overview
Digital Multimeters Instrument Overview Instrument Overview Display Terminals hhc02.eps Item Description High voltage Display Hold is enabled hhc01.eps Continuity selected Item Description Diode test is selected Input terminal for ac and dc current Duty Cycle is selected measurements to 10 A and current M, k –... -
Page 10: Auto Power Off
106 & 107 Users Manual Auto Power Off Measurements The Product automatically powers off after 20 minutes’ Data Hold inactivity. Warning To prevent possible electrical shock, fire or To restart the Product, turn the rotary switch back to the personal injury, do not use the HOLD function OFF position and then to a necessary position. -
Page 11: Measure Ac And Dc Voltage
Digital Multimeters Measurements Measure AC and DC Voltage Volts AC Volts DC Millivolts AC To measure AC and DC voltage: Choose ac or dc by turning the rotary switch to or . Connect the red test lead to the terminal and the black test lead to the COM terminal. -
Page 12: Measure Ac Or Dc Current
106 & 107 Users Manual Measure AC or DC Current Warning To prevent possible electrical shock, fire, or personal injury, remove circuit power before you connect the Product in the circuit when you measure current. Connect the Product in series with the circuit. -
Page 13: Measure Resistance
Digital Multimeters Measurements Measure Resistance Turn the rotary switch to (106 does not have the diode symbol). Make sure power is disconnected from the circuit to be measured. Connect the red test lead to the terminal and the black test lead to the COM terminal. -
Page 14: Test Diodes (107 Only)
106 & 107 Users Manual Test Diodes (107 Only) Measure Capacitance Turn the rotary switch to Turn the rotary switch to Push the YELLOW function button twice to activate Connect the red test lead to the terminal and the Diode Test. -
Page 15: Maintenance
Digital Multimeters Maintenance Maintenance General Maintenance Periodically wipe the case with a damp cloth and mild Beyond replacing batteries and the fuse, do not attempt to detergent. Do not use abrasives or solvents. Dirt or repair or service your Meter unless you are qualified to do moisture in the terminals can affect readings. -
Page 16: Test The Fuse
106 & 107 Users Manual Test the Fuse Turn the rotary switch to (106 does not have the diode symbol). Plug a test lead into the terminal and touch the probe to the A terminal. • A good A terminal fuse is indicated by a reading less than 0.1 Ω. -
Page 17: Replace Batteries And The Fuse
Item Description To replace the batteries or the fuse, see Figure 4. Battery Battery door Test Lead Fuse To contact Fluke, call one of the following telephone numbers: • Technical Support USA: 1-800-44-FLUKE (1-800- 443-5853) • Calibration/Repair USA: 1-888-99-FLUKE (1-888- 993-5853) •... -
Page 18: General Specifications
Storage ..............12,000 m Temperature Coefficient ........0.1 X (specified accuracy) /°C (<18 °C or >28 °C) Fuse protection for current inputs ...... 11A, 1000V Fast Fuse, Fluke specified part only Size (HxWxL) ............142 mm x 69 mm x 28mm Weight .............. -
Page 19: Accuracy Specifications
Accuracy Specifications Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of: ±([% of Reading] + [Number of Least Significant Digits]) Accuracy Function Range... - Page 20 Accuracy Function Range Resolution 400.0 Ω 0.1 Ω 0.5 % + 3 0.5 % + 3 4.000 kΩ 0.001 kΩ 0.5 % + 2 0.5 % + 2 Resistance (Ohms) 40.00 kΩ 0.01 kΩ 0.5 % + 2 0.5 % + 2 ...
- Page 21 Accuracy Function Range Resolution 4.000 A 0.001 A AC Current 1.5 % + 3 1.5 % + 3 (40 Hz to 200 Hz) 10.00 A 0.01 A 4.000 A 0.001 A DC Current 1.5 % + 3 1.5 % + 3 10.00 A 0.01 A ...