Manually Set Clock; Alarm - Oregon Scientific EW103 User Manual

Due to the atmospheric disturbance, the best reception
often occurs at night.
If signal reception is unsuccessful, place your unit next to
a window, press RCC to attempt another signal search.
Manually forcing another signal search will consume more
battery power.

MANUALLy SET CLOCk

If located outside the radio signal range, you can manually
set the clock.
NOTE Once clock is within range and receives radio signal,
clock will automatically synchronise and replace the time /
date that was set manually.
To set the clock manually:
1. Press SET CLOCk.
2. Press + / - to change the settings. (Tip: Press and hold
+ / - to rapidly change values).
3. Press SET CLOCk to confirm.
4. The settings order is: 12/24 hr format, time zone, time,
year, calendar format (m/d), date.
TIP To quick exit at any stage during the setting, press and
hold SET CLOCk.
EW103U: Time zone offset sets the clock +/- 23 hours from
the received clock signal time. If you enter +1 in the time
offset setting, this will give you your local time plus one hour.
EW103A: If you are in the US set the clock to:
P Pacific time
C Central time

ALARM

This clock allows you to wake up to either a conventional
alarm or the sound of nature.
ALARM 1 Beep
ALARM 2 Adaptor connected: Nature sound
(bird chirp)
Batteries only: beep
NOTE
• If both alarms are set for the same time, beep alarm
will sound.
• If time set for alarm 1 and 2 are within 2 minutes apart,
both will turn on at set time, however nature sound will
automatically be selected for snooze function.
• Alarm will sound despite the radio, nature sound or
external music being on.
• If audio line-in cable is unplugged during alarm sound,
snooze alarm will be disabled and only activate again
the next day.
To set the alarm:
1. Press SET ALARM to enter alarm setting.
5
M Mountain time
E Eastern time