iHome iW4 User Manual page 22

Problem
Time sync does not work.
Battery Low icon is always flashing.
Snooze time is too long or short.
Gentle Wake alarm feature is too long
or short.
Alarm did not sound or is not working
properly.
Questions? Visit www.ihomeaudio.com/support/airplay/
English
Possible Solutions
1. Verify that Auto-Time Sync is on. When Time Sync is in Manual mode, pressing the
clock adjust button will sync the iW4's time to a dock iPad, iPhone or iPod.
2. Make sure you are using an iPad, iPhone or newer iPod such as touch nano or classic.
Older iPod models such as iPod mini do not support time sync function. If not
available, set time manually (see page 7).
1. Remove the battery tab (see page 5).
2. Battery is weak or dead, replace with new battery.
3. Battery was not properly installed, check to make sure the + side is facing outwards.
1. Press and hold the Snooze/Dimmer Button then press + or - to adjust and customize
the snooze timer
1. Press and hold the Wakeup/Alarm Reset Button then press + or - to adjust and
customize the Gentle Wake timer (1-10 minutes or OFF).
1. Verify that the AM/PM time and alarm time is set correctly.
2. Make sure to set the alarm time and source for the appropriate alarm and verify that
alarm icon 1 or 2 icon is shown on the display.
3. Verify that the 7-5-2 Wake schedule is set correctly: 7 days is everyday alarm, weekday
is Mon-Fri, and weekend is Sat-Sun (see page 8 for setting alarms).
4. Verify that Alarm Skip was not activated (alarm skip will only apply to the next sound-
ing alarm after which the alarm will sound as programed).
22