Table of Contents Controls and Indicators / Display............................1 Quick Start..................................2 Using the unit ..................................3 Using the Alarms ................................4 Listening to iPad/iPhone/iPod / Listening to Radio......................5 Using the Unit in Other Countries / Listening to other portable audio devices / Sleep Operation / Nap Operation....6 Dimmer Operation / Replacing Clock Backup Battery......................7 A Consumer Guide to Product Safety ..........................8 Trouble Shooting ................................9...
DC 12V 2.7A FM Antenna Display Time Display PM Indicator Alarm Indicators iHome App Indicator AM Indicator Battery Low Indicator Alarm Time /EQ/ Mode Display (Dock/USB Dock/FM/Aux-in) NOTE: AM/PM indicators will not appear when clock is set to 24 hour display mode...
Quick Start 1: Power 2: docking your iPad/iPhone/iPod in the Lightning connector RESET RESET TEST TEST DC 12V, 2.7A Gently dock your iPad mini, iPad with Retina display, Attach AC adaptor cable to DC jack on back of the unit iPhone 5 or iPod touch 5th generation onto the Lightning and plug the other end into a wall socket.
Updating your iDL45 firmware For best performance, make sure to update the iDL45 firmware. To do so, download the free iHome Set app from the App Store. Launch the app, scroll to “Search for Update”, then follow directions to update the firmware.
(”Normal Wake”). You can also wake to a custom playlist. To do so, press and release the + or – Button to select “Playlist Wake”. You must create a playlist named “iHome” in iTunes and have it on your iPad/iPod/iPhone.
2. Press and release the EQ Button as needed to select Treble, Bass, Balance or 3D sound effect, then press the + or – Button to adjust settings. TIP: You can also adjust EQ with the iHome Set app. Listening to Radio Setting up the Antenna Extend FM wire antenna fully for best reception.
1. Plug one end of a 3.5mm stereo audio cable (available at http//:www.ihomeaudio.com) into the headphone or line-out jack on your device and the other end of the patch cord into the iDL45 Aux line-in Jack, located on the back of the unit.
Dimmer Operation During normal operation, press and release the Snooze/Dimmer Button to control the brightness of the LCD display. Replacing Clock Backup Battery The unit comes with 1 CR2450 back-up battery installed to provide continuous alarm Replacing Backup Battery operation and clock settings in the event of a power failure. Remove the battery pull tab before use.
A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Troubleshooting Symptom Possible Problem Solution Unit does not turn on AC adaptor isn't plugged into a working wall Plug the AC adaptor into a working wall socket and plug the connector socket or not plugged into the power supply into the supply jack on the unit jack on back of the unit Unit doesn’t respond Unit requires a reset...
Page 12
Troubleshooting Symptom Possible Problem Solution Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted If the iPad/iPhone/iPod original sound source (MP3) is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different file from a trusted source such as iTunes.
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.