Changing Camera Views
Push
,
,
or
Basic Recording
To begin manual recording, press the Record/Stop
your cameras. By default, "Each Rec" will appear indicating the DVR is
recording each camera independently. Push the Record/Stop
again to stop a recording.
Note: The DVR4-1000™ requires at least one camera connected to begin
recording; a "VIDEO LOSS" message will appear if no camera is present.
The DVR4-1000™ will automatically begin recording when powered on if a
camera is connected.
Before Entering the Menu System
You must stop all record modes before entering playback or the main menu
otherwise a Hard Drive Usage message will appear.
Playback Mode
To enter playback mode, press the Play/Pause
will begin playing.
Press the Play/Pause
Press the Fast Forward
or 8X.
Press the Rewind
To stop playback and return to live camera view, push the Record/Stop
button.
View List of Recordings
To view a list of all recordings, push the Menu
mode. A list will appear with the newest recordings at the top. Move the
cursor using the Up
button to view the recording.
Push the Record/Stop
camera view.
buttons to change between cameras 1-4 in full screen.
button again to pause the recording.
button to increase the playback speed by 2X, 4X
button to reverse playback.
and Down
arrows and push the Play/Pause
button to exit playback and return to the live
10
button when viewing
button
button. The recordings
button while in playback