Time Search - Swann DVR4-1000 User Manual

Time Search

The DVR4-1000™ has a built-in search feature that allows you to enter a
specific date and time to quickly search through recorded footage. While in
playback mode, push the Menu button to bring up the list of recordings
and then press the Record/Stop button to move the cursor to the date
and time at the top of the screen.
Cursor Time
Date –
YY/MM/DD
Press the Left and Right buttons to move the cursor to the desired
value.
Press the Up and Down arrows to change the value the cursor is under.
When you have finished changing the Date and Time you are searching for,
press the Play/Pause button to view the recording.
Note: If the date is outside of the range of your current recordings a "NO
DATA" message will flash.
11