Advanced; How To Set A Hdd Quota For A Camera - Swann 4500 Series Instruction Manual

For IP SAN:
a. In the NetHDD IP Address field, enter the IP address .
b. Click Search to search for available IP SAN drives based on the IP entered.
c. Select the IP SAN drive from the list of IP SAN drives found. For example,
d. Click OK to finish adding the configured IP SAN drive.
16
The HDD Menu

Advanced

You can configure a quota on the HDD for each camera that is connected to the DVR.
Each camera can be allocated a certain amount of space on the HDD.

How to set a HDD quota for a camera?

1. In the Camera list, select the camera you want to configure a HDD quota for.
2. In the Max. Record Capacity field, enter the maximum record capacity in
Gigabyte (GB) to be allocated for the selected camera. You can also copy the
current quota setting of the selected camera to other cameras. Simply click
Copy, select which cameras, and then click OK.
3. Click Apply.
Note: Default Max. Record Capacity is set to 0, which means there is no limit to the
amount of hard disk space each cameras can use.