Connecting To A Wired Ethernet Network - Gateway M675 User Manual

Connecting to a wired Ethernet
network
Your notebook has a network jack that you can use to connect to a 10/100/1000
(gigabit) wired Ethernet network.
Important
To connect to a wired Ethernet network:
1
Insert one end of the network cable into the network jack
of your notebook.
2
Insert the other end of the network cable into a network jack. Ask your
network administrator to help you select the correct network jack.
Your notebook may be equipped with a built-in wireless
Ethernet emitter or you may have a wireless Ethernet
PC Card. For information about connecting to a wired or
wireless Ethernet network, see
Gateway M675" on page
installing a wireless Ethernet PC Card, see
removing a PC Card" on page
www.gateway.com

Connecting to a wired Ethernet network

"Networking Your
205. For information about
"Adding and
256.
on the back
39