Memory; Memory Card Reader; Modem (Dial-Up) - Gateway M675 User Manual

Chapter 17: Troubleshooting

Memory

You see a "Memory error" message
Make sure that the memory modules are inserted correctly in the memory
bay slots. For more information, see
page
Use PC Doctor or a third-party diagnostic program to help determine if a
memory module is failing. For more information, see
memory" on page
You see a "Not enough memory" error message
Close all programs, then restart your notebook.
Help and
Support

Memory card reader

Drive letters for the memory card slots do not appear in the My
Computer window
The modular drive may not be inserted completely into the modular bay.
Press the module into the bay, then try to access the disc again.
Reboot your notebook.

Modem (dial-up)

Your modem does not dial or does not connect
Make sure that the modem cable is plugged into the modem jack and not
the Ethernet network jack. See
to make sure that the connections have been made correctly.
Make sure that your notebook is connected to the telephone line and the
telephone line has a dial tone.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
290
259.
259.
For more information about troubleshooting memory errors
in Windows XP, click Start, then click Help and Support.
Type the keyword memory error in the Search box
www.gateway.com
"Adding or replacing memory" on
, then click the arrow.
"Back" on page 7 and
"Adding or replacing
"Back" on page 269