Gateway M520 User Manual page 77

8
If your new hard drive already includes the hard drive kit bracket,
go to Step
-OR-
If you need to move the hard drive kit bracket from your old hard
drive kit to your new hard drive, go to
9
Remove the screws that secure the hard drive to the hard drive kit
bracket.
10
Remove the bracket from the old drive.
11
Insert the new drive into the bracket so the screw holes line up.
12
Replace the two screws that secure the bracket to the drive.
13
Slide the new hard drive kit into your notebook.
14
Replace the screw that secures the hard drive kit to your notebook.
15
Insert the battery and turn your notebook over.
16
Connect the power adapter and modem and network cables, then
turn on your notebook.
17
For instructions on installing Windows, your drivers, and your
applications, see the instructions that were included with the Restore
DVD.
13.
www.gateway.com
Step 9.
71