Gateway M520 User Manual page 124

12
Reset the power on your cable or DSL modem.
13
Restart all of your computers on the network.
14
To connect to the access point router, see
point wireless network" on page
Connecting to an access point wireless network
After you have set up your wireless access point router, you need to set
up the network connection on your computers.
To connect to an access point wireless network:
1
Before connecting to an access point router, you must turn on
wireless networking. For more information, see
combinations" on page
2
Click
Start
If your Control Panel is in Category View, click
Connections
3
Click/Double-click
window opens.
118
32.
, then click
Control Panel
. The Network and Internet Connections window opens.
Network Connections
www.gateway.com
"Connecting to an access
118.
"System key
. The Control Panel window opens.
Network and Internet
. The Network Connections