Gateway M520 User Manual page 126

Configuring computer settings for an access point network
If you are unable to connect to an access point router in the
list, the most likely cause is that the access point router is using
networks
WEP security. You need to configure your network settings to use the
same WEP security settings as those used by the access point router.
To configure computer settings for an access point wireless network:
1
With the Connect to Wireless Network dialog box open, click the
network you want to configure your computer for, then click
Advanced
opens.
2
Click the
120
. The Wireless Network Connection Properties dialog box
Wireless Networks
www.gateway.com
tab.
Available