Gateway M520 User Manual page 64

4
Completely discharge the battery by doing the following:
a
From the desktop, right-click on the power icon, then select
Adjust Power Properties
b
Click the
c
Click the arrow button to open the
Always On
d
Click the
e
Click to deselect the
checkboxes. Let the battery drain until your notebook
automatically turns off.
Important
5
After the battery is completely drained, reconnect your notebook to
AC power.
6
Charge the battery completely until the yellow battery status
indicator goes out.
7
When you are ready to use your notebook again, do the following:
a
From the desktop, right-click on the power icon, then select
Adjust Power Properties
b
Click the
c
Click the arrow button to open the
the power scheme you want.
d
Click the
e
Click to select the
checkboxes.
58
.
Power Schemes
.
tab.
Alarms
Low battery alarm
Do not use your notebook during the recalibration
process. Do not connect the AC adapter to your
notebook during this process, or you will interrupt
the recalibration process and will have to start
again.
.
Power Schemes
tab.
Alarms
Low battery alarm
www.gateway.com
tab.
Power Schemes
and
tab.
Power Schemes
and
list, then click
Critical battery alarm
list, then click
Critical battery alarm