Download Print this page

Important Installation Instructions - Genie IS Owner's Manual

Advertisement

OVERVIEW OF
POTENTIAL
HAZARDS
Garage doors are large, heavy objects that move with the help of springs
under high tension and electric motors. Since moving objects, springs under
tension, and electric motors can cause injuries, your safety and the safety of
others depend on you reading the information in this manual, if you have
questions or do not understand the information presented, call your nearest
service representative.
in this section and those that foilow, the words Danger, Warning, and
Caution are used to emphasize important safety information.
The word:
,_ DANGER means that severe injury or death wilt result from failure
to follow instructions.
,_ WARNING means that severe injury or death can result from failure
to follow instructions.
,_ CAUTION means that property damage or injury can result from
failure to foliow instruction.
The word f40*__: is used to indicate important steps to be followed
or important considerations.
FILL THIS IN ATTIME OF INSTALLATIONFORYOUR OWN
RECORDS,SOTHAT IT WILL
BE AVAILABLE IFYOU EVER NEEDTO CALL US.
Date Purchased
/
/
Serial Number
/
/
(See Fig. 1-1 )
Operator Model
DealerName
DealerAddress
City
State
Zip
S'_ou d se vFo@ eve" be ,u,_ dr_,d
IMPORTANT
INSTALLATION
INSTRUCTIONS
,
,
To reduce the risk of
severeinjuryor death:
READ AND FOLLOW
ALL SAFETY,
INSTALLATION
AND OPERATION
INSTRUCTIONS.
If you have any questions
or do not understand
an instruction,
call your
service
representative.
Do Not install Opener
on an improperly
balanced
door. An improperly
balanced
door may cause severe
injury. Repairs
and
adjustments
to cables, spring
assemblies,
and other hardware
must be made by a
trained service
person
using proper tools
and instructions.
3.
Remove
all handles
and ropes,
and
disable
all locks connected
to the door
before installing
the Opener.
4.
Install
door
Opener
7' or more
above
the floor.
Mount the emergency
release
knob 6' above the floor.
5.
Do Not connect
the Opener
to the
power
source
until
instructed
to do so.
6.
Locate theWall
Control:
*
Within sight of the garage door.
*
At a minimum
height of 5', so small
children
cannot
reach it.
*
Away from all moving parts of the
garage
door.
7.
Install
the entrapment
WARNING
label
next to the wall button or console.
Install
the emergency
release
tag on the
emergency
release.
8.
The operator
must
reverse
when the door
contacts
a 11/2" high object on the floor at
the center of the doorway. This is the size of
a 2" x 4" board laid flat.
Visit
our
website
at:
www.geniecompany.com
SAVETHESE INSTRUCTIONS

Advertisement

loading