Turning The Camera On And Off; Power Saving Functions (Auto Off); Ac Power Supply - Nikon COOLPIX S3500 Reference Manual

Turning the Camera On and Off
• When the camera is turned on, tile power on lamp (green) lights and tile monitor turns on
(the power-on lamp turns offwhen the monitor turns on).
• To turn offthe camera, press the power switch. When the camera is turned off, both the
power on lamp and the monitor turn off.
• To turn on the camera in playback mode, press and hold the [] (playback) button. The
lens will not extend.
[] Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power on lamp will flash, if no operations are performed for approximately another
three minutes, the camera will turn off automatically.
To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
Power switch, shutter release button, O (shooting mode) button, [] (playback) button, or •
(_ movie record) button.
Flashes
No operations _{_ No operations
performed V performed
ooooooooo_,
oooeoeoeo_-
3 min
Camera enters standby mode
Camera turns off
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (_99) in the setup menu (_98).
• By default, the camera enters standby mode in about one minute when you are using shooting
mode or playback mode.
• When the AC Adapter EH 62G (available separately) is used, the camera enters standby mode after
30 minutes (fixed).
[] AC Power Supply
• If the AC Adapter EH 62G (available separately; _94) is used, COOLPIX $3500 can be powered
from an electrical outlet and operated for shooting or playback.
• Do not, under any circumstances, use another make or model of AC adapter other than the
EH 62G. Failure to observe this precaution could result in overheating or in damage to the camera. 25
F,"
oo
o_
g-