Ericsson DIALOG 4223 User Manual page 54

Call Forwarding
*22*
0 z
í
#22#
í
54
Program and activate a new External Diversion address
To set a new Individual External Diversion address:
Press.
Enter the digit(s) for external line access and the new
External Diversion address.
A maximum of 24 digits.
Note: Which digit to press for external line access depends
on the configuration of the system.
If your public network requires waiting for a second dial
tone, press
#
Press to activate the Individual Diversion.
Verification tone.
Press to finish the procedure.
Note: Before you leave, call your extension to check if the
External Diversion has been set up correctly. This way you
can make sure that the number has been programmed
properly and that your calls will not be diverted to another
person by mistake. Individual External Diversion can also be
used via the DISA function, see section
Features" on page 90.
Cancel External Diversion
Press.
Press.
Note: The programmed diversion address is not removed
from the memory, the diversion is just inactive.
BusinessPhone – Dialog 4223 Professional / Dialog 3213
*
.
"Other Useful