Ringing Signal - Ericsson DIALOG 4223 User Manual

Settings
prog
ringing
type
next
í
volume
lower
í
106

Ringing signal

By programming, you can adjust ringing type (2 types), ringing
volume (10 steps) and ringing character (10 characters).
Press (see display).
12 May 10:35
PHONE PROGRAMMING
key short-no.
Press (see display).
You can now select ringing type, volume or character.
Ringing type
Select type 1 if you want to set the ringing volume at a constant
level, select type 2 if you want gradually increasing volume when
the phone rings.
Press (see display).
You will hear the selected type.
Press to change (see display).
Press to finish the procedure.
Note: When type 2 is selected, the programming of the
ringing volume is not applicable.
Ringing volume
Press (see display).
You will hear the selected volume (0...lowest volume, 9...highest).
Press lower or higher to change the level (see display).
Press to finish the procedure.
Note: This programming is not applicable when you have
selected ringing type 2.
BusinessPhone – Dialog 4223 Professional / Dialog 3213
+15°
diversion ringing