Ericsson DIALOG 4223 User Manual page 25

Ô Õ
Automatic Redial1
Ô
Pause Auto Redial
Ô Õ
Pause Auto Redial
BusinessPhone – Dialog 4223 Professional / Dialog 3213
Notes:
It is not possible to do a new request on a key holding an
already activated request until the existing one is cancelled.
When the Automatic Redial lamp is rapidly flashing, your
telephone is busy and you cannot receive or make new
calls.
The number of redial attempts and how long the function is
active is programmed by your system administrator.
If you have activated a diversion on your telephone, this
function is not available.
If Tandem configuration is activated, the secondary
telephone cannot use this function. See section
configuration" on page 90.
Cancel
Press the relevant programmable key to cancel the
Automatic Redial request (pre-programmed).
Note: Depending on system programming, the Automatic
Redial request could be cancelled automatically.
Pause
It is possible to pause all of your successfully activated requests by
programming a separate Pause Auto Redial key, see section
"Program a function" on page 101.
Press to pause (pre-programmed).
The requests are paused and the key lamps of the Automatic
Redial keys are flashing slowly.
Press to resume Automatic Redial (pre-programmed).
Outgoing Calls
"Tandem
25