Ericsson DIALOG 4223 User Manual page 45

ì
activate
caller
trunk
return
reset
print
BusinessPhone – Dialog 4223 Professional / Dialog 3213
In case of a typing error, press the Volume Down key to delete
the latest entered digit.
Press to confirm the Password (see display).
Select the type of meter you want to read out.
12 May 10:35
SELECT TYPE OF METER
caller
Press to read out an extension counter (see display).
If the system is included in a network, you will be able to read out
the cost of the tie lines in this menu.
Or:
Press to read out a trunk line counter (see display).
12 May 10:35
ENTER DIRECTORY NUMBER:
display
z
Enter the directory number of the desired extension or trunk
line.
(If you do not enter a directory number the accumulated cost of the
entire system will be shown.)
Press to return to previous menu (see display).
Press to reset counter (see display).
Note: The
when a printer is connected to the system. To initiate a reset
procedure you require a special authority level (please ask
your system administrator if this feature is available on your
phone). To avoid different counter values for total
extensions and total trunk lines in the system, we
recommend to reset all the extensions and trunk line
counters at the same time.
Press to initiate a printout on the printer (see display).
This function is applicable when a printer is connected to the
system.
You also require a special authority level to initiate a printout. For a
detailed description of the printout, see section "Printout" on
page 47.
+15°
trunk
+15°
print reset
function in this menu is only applicable
reset
Call Metering
return
return
45