Connecting And Disconnecting With A Computer In The Usb Flash Mode - Casio fx-CP400 User Manual

Transfer ClassPad display image data to the computer
For information about connecting ClassPad and Screen Receiver, see the Screen Receiver User's Guide.
Computer System Requirements
• Windows XP Home Edition
• Windows XP Professional (32-bit)
• Windows 8 (32-bit, 64-bit)
• Mac OS 10.5, Mac OS 10.6, Mac OS 10.7, Mac OS 10.8

Connecting and Disconnecting with a Computer in the USB Flash Mode

Establishing a USB connection between ClassPad and a computer will cause the computer to recognize the
ClassPad's storage area as a USB Flash Drive.
Important!
Do not touch the USB cable plugs and screen while a data communication operation is in progress. Static
electricity from your fingers can cause data communication to be terminated.
u To establish a connection between ClassPad and a computer
1. Connect one end of the USB cable that comes with the
ClassPad to the USB port of your computer.
2. Connect the other end of the USB cable to the
ClassPad as shown nearby.
• The ClassPad will turn on automatically and the
"Select Connection Mode" screen will appear.
3. Tap [USB Flash].
• Establishing a connection between the ClassPad and a computer will
cause the screen shown nearby to appear.
4. On your computer, open the ClassPad drive.
• The ClassPad drive represents the ClassPad's storage area.
5. Perform the required operation on your computer to transfer the data.
u To terminate the connection between the ClassPad and a computer
1. Depending on the type of operating system your computer is running, perform one of the following
operations.
Windows: First, check the drive letter (E, F, G, etc.) assigned to the ClassPad drive. Click the "Safely
Remove Hardware" icon in the toolbar in the lower right corner of the display. On the menu that appears,
select the "USB mass storage device" whose letter matches the ClassPad drive letter. Check to make sure
the "Safe To Remove Hardware" message is displayed.
Mac OS: Drag the ClassPad drive icon to the Eject icon (Trash icon). Check to make sure that the ClassPad
drive icon is no longer on your desktop.
2. The message "Complete!" will appear on the ClassPad screen. To close the message dialog box, tap [OK].
3. Disconnect the USB cable from the ClassPad.
• Windows Vista (32-bit)
• Windows 7 (32-bit, 64-bit)
Chapter 15: Performing Data Communication 251