Using View Window Memory - Casio fx-CP400 User Manual

View Window Preset Parameters
Selecting preset View Window parameters configures the settings shown in the table below.
Note: The values in the explanations below apply during the half-size view of the Graph window (which is the
initial default setting of the Graph & Table application). Tapping r on the icon panel will switch to the
full-screen view and change the View Window settings.
Parameter Name
Initial (Default)
Trigonometric
Standard
Picture
Auto
View Window parameter precautions
• When the View Window setting produces an axis that does not fit on the display, the scale of the axis is
indicated on the edge of the display closest to the origin.
• Changing the min ( min) or max ( max) value automatically changes the dot ( dot) value, while changing
the dot ( dot) value automatically changes the max ( max) value.

Using View Window Memory

You can save your View Window setup for later use.
u To save the current View Window setup
1. Tap 6, or tap O and then [View Window] to display the View Window dialog box.
2. Change parameters as required (see "To configure View Window parameters" on page 100).
3. Tap [File] and then [Save File]. This displays a dialog box for inputting a name for the View Window setup.
4. Enter the name and then tap [OK].
u To recall a setup from View Window memory
1. Tap 6, or tap O and then [View Window] to display the View Window dialog box.
2. Tap [File] and then [Open File]. This displays a list of names of View Window setups stored in ClassPad
memory.
3. Select the name of the setup you want, and then tap [OK].
• This causes the current View Window parameters to be replaced by the parameters of the recalled setup.
Description
• Both scale and scale are set to 1. The -axis direction is displayed from –7.7
( min) to 7.7 ( max), while the -axis direction is from –4.6 ( min) to 4.6 ( max).
• The following settings are configured:
degree = 400 grad,
Basic Format Angle setting.
• scale is set to π/2* radian = 90 degree = 100 grad. The values depend on the
Basic Format Angle setting. This scale is used as the basis to display an -axis
direction in the range of scale × –7.7 ( min) to scale × 7.7 ( max). For example,
when the Angle setting is Degree, min = –693, max = 693.
• -axis settings are fixed as follows, regardless of the Angle setting:
scale = 1, min = –2.1, max = 2.1.
• min, max, step settings are the same as Initial Default.
Both scale and scale are set to 1. Both the -axis and -axis directions are
displayed in the range of –10 ( min, min) to 10 ( max, max).
View Window settings that maintain the current background image are applied.
View Window settings are automatically optimized for the expression (the last
expression selected in the case of multiple expressions) selected for graphing on
the Graph Editor window.
min = 0,
step = ( max – min)/120*. The values depend on the
* These values are displayed as decimal format values.
Chapter 3: Graph & Table Application
max = 2π* radian = 360
102