Turning Power On Or Off; Power Supply; Backing Up Data - Casio fx-CP400 User Manual

Turning Power On or Off

While the ClassPad is turned off, press c to turn it on.
To turn off the ClassPad, press f and then c.
Auto Power Off
The ClassPad also has an Auto Power Off feature. This feature automatically turns the ClassPad off when it is
idle for a specified amount of time. For details, see "To configure power properties" on page 246.
Note
Any temporary information in ClassPad RAM (graphs drawn on an application's graph window, a dialog box
displayed, etc.) is retained for approximately 30 seconds whenever power is turned off manually or by Auto
Power Off. This means you will be able to restore the temporary information in RAM if you turn ClassPad back
on within about 30 seconds after it is turned off. After about 30 seconds, the temporary information in RAM is
cleared automatically, so turning ClassPad back on will display the startup screen of the application you were
using when you last turned it off, and the previous information in RAM will no longer be available.

1-2 Power Supply

Your ClassPad is powered by four AAA-size batteries LR03 (AM4), or four nickel-metal hydride batteries.
The battery level indicator is displayed in the status bar.
full
Important!
• Be sure to replace batteries as soon as possible whenever the battery level indicator shows
• Replace batteries immediately whenever the battery level indicator shows
not be able to perform data communication or other functions.
• For information about initial setup operations required after replacing batteries, see "Replacing Batteries and
Setting Up the ClassPad" in the separate Quick Start Guide.
• When battery power is very low, your ClassPad may not turn back on when you press its c key. If this
happens, immediately replace its batteries.
• The following message indicates that batteries are about to go dead. Replace batteries immediately whenever
this message appears.
If you try to continue using the ClassPad, it will automatically turn off. You will not be able to turn power back
on until you replace batteries.
• Be sure to replace batteries at least once a year, no matter how much you use the ClassPad during that time.
Note:
The batteries that come with the ClassPad discharge slightly during shipment and storage. Because of
this, they may require replacement sooner than the normal expected battery life.

Backing Up Data

ClassPad data can be converted to a VCP file or XCP file and transferred to a computer for storage. For details,
see "15-2 Performing Data Communication between the ClassPad and a Personal Computer".
medium low dead
(dead). At this level, you will
Chapter 1: Basics
(low).
11