Moving And Copying Figures; Pinning An Annotation On The Geometry Window; Specifying The Number Format Of A Measurement - Casio fx-CP400 User Manual

Moving and Copying Figures

u To move a figure
1. Draw a figure, and then select it.
2. Drag the figure to move it to the location you want.
• A selection boundary appears around the figure when you drag it.
3. Remove the stylus from the screen.
u To copy a figure
1. Draw a figure, and then select it.
2. Tap [Edit] - [Copy], and then [Edit] - [Paste].
3. Drag the pasted figure to the location you want.

Pinning an Annotation on the Geometry Window

You can pin an annotation on the Geometry window using the Pin function. By default, annotations are
'Unpinned', so they pan or zoom along with the Geometry window. Pinning an annotation fixes its position on
the screen so it is always displayed in the same location on the Geometry window.
u To pin or unpin an annotation on the Geometry window
1. Select (highlight) the text on the Geometry window.
2. Tap [Edit], [Properties], and then [Pin] or [Unpin].
• When text is pinned, it maintains its position as shown here even when the window is panned.

Specifying the Number Format of a Measurement

You can specify the number format for each measurement value or all the measurement values on the
Geometry window. The initial default number format setting for measurement values is "Fix 2".
u To specify the number format for selected measurement value(s)
1. Select (highlight) the measurement(s) you want to specify the number format.
2. Tap the [Edit], [Properties], and then [Number Format].
3. On the dialog box that appears, select the number format you want by tapping it.
• For the meaning of each number format name, see "To specify the numeric value display format" on page 34.
4. Tap [OK].
• This will display the measurement value(s) you selected in the step 1 using the specified number format.
u To specify the number format for all the measurement values on the Geometry window
1. Tap anywhere on the screen where there are no figures to deselect all of the figures.
2. Perform the procedure from step 2 under "To specify the number format for selected measurement value(s)".
• This will display all the measurement values on the Geometry window using the specified number format.
Chapter 8: Geometry Application 162