Installing and Removing the USB Wireless Receiver
A USB wireless receiver is built into the back of the calculator. Remove the USB
wireless receiver when you want to communicate between the calculator and a
computer.
Return the USB wireless receiver to the calculator when you are not communi-
cating with a computer.
Connecting with a Computer
Use the following procedure to connect the USB wireless receiver to your
computer and to configure the computer's communication settings.
1. Plug the USB wireless receiver into
the computer's USB port.
• Be sure to connect directly to the
computer's USB port. Proper operation
may not be possible if you connect to a
USB hub or some other indirect
connection.
2. Install the USB driver, if required.
• Following the instructions that appear on
your computer screen. Note that with
some operating systems, USB driver
installation
automatically.
JZ-12W_E_p05_19.p65
PART 1
Data Communications
will
be
performed
13
13
E
05.8.8, 4:26 PM