Casio fx-CP400 User Manual page 101

2. If you want to configure settings using preset ClassPad View Window parameters, perform the operations
described below.
To configure this setting:
ClassPad initial defaults
Configure settings optimized for trigonometric
function graphing
Display both the -axis and -axis in a range of
–10 to 10
Configure View Window settings that maintain the
current background image
Configure parameters automatically optimized for
a graph
• For details about each preset parameter, see "View Window Preset Parameters" (page 102).
3. Configure View Window parameters required for the type of graph you want to draw.
Rectangular Coordinates
Use this item:
min
max
scale
dot
min
max
scale
dot
• Selecting the -log and/or -log check box at the top of the display will switch the applicable axis to
logarithmic scale. Selecting one of the check boxes results in a semi-log graph, while selecting both check
boxes results in a log-log graph.
Polar Coordinates and Parametric Coordinates
Use this item:
min
max
step
4. After all the parameters are the way you want, tap [OK].
• When you tap [OK] after changing View Window dialog box settings, the graph is redrawn automatically
using the new View Window settings.
To configure this View Window parameter:
-axis minimum value
-axis maximum value (Specify a value greater than min.)
-axis marker spacing
Value of each dot on the -axis
-axis minimum value
-axis maximum value (Specify a value greater than min.)
-axis marker spacing
Value of each dot on the -axis
To configure this View Window parameter:
Minimum value of
Maximum value of
Step size of (Specify a non-zero value.)
Do this:
On the [Memory] menu select [Initial], or tap the
[Default] button.
On the [Memory] menu, select [Trigonometric].
On the [Memory] menu, select [Standard].
On the [Memory] menu, select [Picture].
On the [Memory] menu, select [Auto].
Chapter 3: Graph & Table Application 101