Clarion VRX928RVD Owner's Manual page 44

TV Operations
TV functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner.
WARNING
For your safety, the driver should not
watch the TV or operate the controls while
driving. Please note that watching and
operating the TV while driving are
prohibited by law in some countries.
Watching TV
Notes:
• For your safety, the VRX928RVD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.
• After setting a country to be received, tune in to a
station. For setting the country, see the subsec-
tion "Setting the TV area".
1. Press the [FUNC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [d] or [a] button to tune in the
desired TV station.
When the panel is open, the same operation
is also available by using the [a] and [d]
button in the panel.
Watching a video
The TV tuner has a VTR input terminal to which 1
external device can be connected. Connect a 12V
video cassette player (VCP) or video cassette
recorder (VCR) to the TV tuner input terminal.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [EXTRA SELECT] key in the
MENU screen to select the [VTR] key.
3. To return to the TV broadcast, touch the
screen again and touch the [EXTRA
SELECT] key in the MENU screen to select
the [TELEVISION] key.
52
VRX928RVD
Seek tuning
1. Press the [BND] button and select the
desired TV band (TV1 or TV2).
If "MANU" is lit in the display, press and hold
the [BND] button for 1 second or longer.
"MANU" in the display goes off and seek
tuning is now available.
2. Press the [d] or [a] button to automatically
seek a station. Press the [d] button to
automatically tune up the frequency band to
the next available TV station; press the [a]
button to automatically tune down.
When the panel is open, the same operation
is also available by using the [a] or [d]
button in the panel.
Selecting stations with the KEY PAD
This function displays the KEY PAD on the screen
enabling you to tune in through auto store, preset
scan.
Press the [KEY PAD] button to display the KEY PAD.
To use auto store,
touch the [AS] key for about 2 seconds.
To perform a preset scan,
touch the [PS] key.
To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF] key.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly tune
the desired frequency.
1. Press the [BND] button and select the
desired band. (TV1 or TV2)
If "MANU" is not lit in the display, press and
hold the [BND] button for 1 second or longer.
"MANU" appears in the display and manual
tuning is now available.