Clarion VRX928RVD Owner's Manual page 38

VISUAL Operations
"HUE":
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available only when the car is
stopped and the parking brake is applied.
"COLOR":
Adjust the color saturation.
• This operation is available only when the car is
stopped and the parking brake is applied.
3. Operate the touch key to adjust a level.
"BRIGHT":
[–] key or [+] key
"HUE":
[R] key or [G] key
"COLOR":
[–] key or [+] key
4. When adjustment is made, touch the [RTN]
key to return to the ADJUST MODE menu.
Touch the [RTN] key again to return to the
STANDARD screen.
To return from the adjust a level display to the
STANDARD screen, press the [ADJ] button
once again.
Changing over monitor display size
This function is available only when the panel is
open.
Note
• This function is not available while you are driv-
ing.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [DISP] button for 1 second or
longer to change over the monitor display
size. Each time you press the [DISP] button,
the monitor display size changes in the fol-
lowing order:
"F. WIDE" "CINEMA"
"WIDE" "F. WIDE"
"NORMAL": (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
"WIDE": (wide mode)
The image at right and left ends in a display
elongates horizontally.
"F. WIDE": (full wide mode)
The whole image elongates horizontally.
46
VRX928RVD
Notes:
• When a normal 4:3 size image, not being a wide
• During superimposed display, it becomes a full-
• When the monitor display size mode is changed,
Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CAA-188).
Notes:
• This function is not available when the display is
Switching the 2-ZONE/3-ZONE
The front monitor lock and rear monitor lock al-
lows you to enjoy 2-ZONE and 3-ZONE.
2-ZONE:
Use the front monitor lock (or rear monitor lock)
to lock the receiver screen image (or image from
a separately sold rear monitor) to switch the
speaker sound to a sound mode that differs
from the sound accompanying the image.
3-ZONE
When a separately sold rear monitor is con-
nected, use the front or rear monitor lock to lock
the image of the receiver and that of the rear
monitor and to switch the speaker sound to a
"NORMAL"
sound mode that differs from the sound accom-
panying the image.
Notes:
• The front monitor lock displays the image of an
• The rear monitor lock displays the image of an ex-
• When 2-ZONE or 3-ZONE is used, the sound
• A rear monitor is a separately sold accessory.
"CINEMA": (cinema mode)
The image at both top and bottom in a dis-
play disappears.
one, is viewed by displaying it fully on a wide
monitor display in a wide mode or a full-wide
mode, a part of the peripheral image will be lack-
ing or deformed. In deference to the intention of
producer, an original image can be viewed in a
normal mode.
wide mode.
only the monitor display size indication superim-
posed on the screen ("NORMAL", "WIDE",
"F.WIDE" or "CINEMA") will be changed, then the
corresponding display size mode will be engaged.
stored.
external device (VTR, TV game console, etc.)
connected to the Visual 2 or NAVI terminal.
ternal device (VTR, TV game console, etc.) con-
nected to the Visual 1 terminal.
from an external device (VTR, TV game console,
etc.) can only be heard from headphones con-
nected to the external device.