Clarion VRX928RVD Owner's Manual page 30

DVD Video Player Operations
2. Touch the [SRCH] key.
Each time you touch the [SHIFT] key, you
can switch between title number input "[T**]"
and chapter number input "[C***]".
• Title
A large segment to divide the data area of
the disc.
• Chapter
A small segment to divide the data area of
the disc.
3. Input the number of the title that you want to
play back with the [0] to [9] key.
4. Touch the [ENT] key.
Playback starts from the scene of the input
title number or chapter number.
• If the input title number does not exist or
searching with a title number is not al-
lowed, the following message appears to
invalidate the input.
Scan or Repeat play
1. Touch the screen, the MENU screen ap-
pears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
3. Touch the touch key of the function you want
to play.
[CHAPTER SCAN] (Chapter scan play)
Scans and plays back all chapters recorded on
the DVD-Video, the first 10 seconds for each.
"CHAPTER SCN" will appear in the screen dur-
ing play.
[CHAPTER REPEAT] (Chapter repeat play)
Plays back one chapter repeatedly.
"CHAPTER RPT" will appear in the screen dur-
ing play.
[TITLE REPEAT] (Title repeat play)
Plays back all chapters within the title repeat.
"TITLE RPT" will appear in the screen during
play.
4. To cancel play, touch the touch key again.
To return to the original screen, touch the
[RTN] key.
• To return the previous screen, touch the
[RTN] key.
38
VRX928RVD
TOP function
The TOP function resets the DVD player to the
first chapter of the track.
1. Press the [BND] button to playback the first
chapter(chapter No. 1).
Using the title menu
On DVD discs containing two or more titles, you
can select from the title menu for playback.
1. Press and hold the [MENU] button for 1 sec-
ond or longer during playback.
The title menu screen appears.
• Press the [MENU] button, and playback re-
sumes from the scene played back before
[MENU] button is pressed.
• Depending on the disc, the title menu can-
not be called.
2. Touch the [w], [z], [Å] or [Î] key to select
the item.
• Depending on the disc, items cannot be
selected with the ten-key buttons.
3. Touch the [ENT] key.
Switching among languages
On discs in which two or more audios or audio
languages have been recorded, you can switch
among the audio languages during playback.
1. Display the sub KEY PAD using the proce-
dures described in the section "KEY PAD
operation".
2. Touch the [AUDIO] key during playback.
Each time you touch the key, you can switch
among audio languages.
• Depending on the disc, up to 8 audios may
be recorded. For details, see the mark of
the disc ( : Indicates that 8 audios have
8
been recorded).
• When the power is turned on and when the
disc is changed with a new one, the lan-
guage set at the time of factory shipment is
selected. If that language has not been re-
corded, the language specified on the disc.
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
• It may take time to switch among audios.