Advanced Radar Configuration - Garmin GPSMAP 4010 Owner's Manual

Gpsmap 4000/5000 series
Hide thumbs Also See for GPSMAP 4010:
Table of Contents

Advertisement

Using Radar
To customize safe-zone settings:
1. From the Radar screen, select
2. Select from the following options:
Range—change the measured radius of the safe zone ring to a specified distance from 500 ft.
to 2.0 nm (or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi).
Time to
(Safe Zone)—sounds an alarm if AIS or MARPA determines that a target will intersect
the Safe Zone within the defined time interval (ranging from 1 to 24 minutes).
Display Setup—configure how other vessels are displayed on the Radar screen.
Display Range—set the distance from your location that AIS vessels are displayed.
Details—show or hide details for each vessel.
Proj. Heading—set the projected heading time.
trails—set the number of minutes that trails for vessels that you are position tracking
are displayed on the Radar screen, or turn trails off.

Advanced Radar Configuration

To access advanced radar settings, from the Radar screen, select
Rotation Speed (GMR 18/24/404/406 series models only)—set the rotation speed of your radar to
Normal Speed or High Speed. High Speed increases the speed at which the antenna rotates, which
increases the speed at which the screen updates.
Front of Boat—offset the front of the boat if you mount the radar at an angle.
Data Bars—show or hide cruising, navigation, fishing, fuel, or sailing numbers
Appearance—configure radar display options.
Color Scheme—change the colors used for the radar display.
Orientation—change the perspective of the radar display.
Look-Ahd Spd—turn on to shift your current location toward the bottom of the screen as your
speed increases. Enter your top speed for the best results.
Heading Line—show or hide a line in the direction of travel.
Rings—show or hide the radar range rings.
Nav Lines—show or hide a colored line that indicates the route you are currently navigating.
Waypoints—show or hide waypoints that are within the range displayed on the Radar screen.
Select
Navigation Only
44
Menu
>
Other Vessels
to only display waypoints associated with the currently active route.
>
Collision
Alarm.
Menu
Radar
Setup.
>
(page
GPSMAP
4000/5000 Series Owner's Manual
®
(page
51)
9).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents