Using Combinations - Garmin GPSMAP 4010 Owner's Manual

Use the Combinations screen to view a combination of different screens at the same time. The
number of options available on the Combinations screen depends on the optional network devices
you have connected to your chartplotter, and whether you are using an optional BlueChart g2
Vision SD card. You can combine two or three screens (GPSMAP 4000 series) or up to four screens
(GPSMAP 5000 series).
To access the Combinations screen from the Home screen, select Combinations.
The Combinations screen shows a list of possible screen combinations. When viewing three
combination screens, one screen is larger than the others. The charts are numbered with a
corresponding button in the lower-right corner (GPSMAP 4000 series). To switch the larger screen,
select the icon from the lower-right corner that represents the screen you want (GPSMAP 4000
series) or touch Menu >
to select a single-screen combination page that will provide configurable data fields (GPSMAP 5000
series).
Navigation Chart, Radar, and Sonar Combination
To access additional settings or options for the Combinations screen, select Menu.
GPSMAP 4000/5000 Series Owner's Manual
®

Using Combinations

Combinations Screen
Change Combination
(GPSMAP 4000 series)
(GPSMAP 5000 series). Touch one of the screens
Data fields
Focus screen
(GPSMAP 4000 series)
Select to switch focus
screen (GPSMAP 4000
series only)
Using Combinations