Automatic Memory Allocation; Memory Write Protect - AOR AR8200 Manual

To recap:
Once the three digit memory location has been selected, the 2 second keypad time-out does not apply to
the rest of the sequence.
d) To add the text comment "70cm",
keys to move position of text input. To accept the new frequency and text comment "70cm",
, if you wish to add write protect
Note: If the memory location has been previously used and a text comment is displayed,
e) In the write protect menu,
to "ON", the default is off.
To accept the input and store the data to the specified location,
. The display will revert to 2VFO mode.

5-2-2 Automatic memory allocation

When you
available empty memory location which has no data stored in it.
channel offered or choose another location as described in the previous sections. Alternatively you may
the key to add a text comment then complete memory write by pushing
AR8200 has to look through many full memory channels before an empty channel is located, the
message "MEM WRITE SEARCH BLANK CH" may be briefly displayed.

5-3 Memory write protect

As indicated in section 5-2 , it is possible to write protect memory contents to ensure that important
memory channels are not accidentally over-written. It is important to remember that by write protecting a
memory channel, it may prevent certain facilities from being used (such as over-writing the memory
channel or copying / swapping memory data to it).
The memory protect status may be assigned as the last stage of memory write (as per section 5-2 of this
manual) or toggled on/off using the memory channel EDIT facility, refer to section 9-6 of this manual
regarding memory channel EDIT facilities, in particular MEMORY PROTECT.
It is also possible to write protect a whole memory bank, this prevents accidental deletion of data when
resizing memory banks.
then use the main dial to select the text and the
to delete the existing comment.
to toggle the status
to start the memory write sequence, the AR8200 will initially offer the first
Section 5-2-1, 5-2-2, 5-3
to access the PROTECT menu.
to accept the
. If the
55