Em8200 All-Mem Save And Load - AOR AR8200 Manual

Make sure that global write protect is not set or the data load will be unsuccessful and no data will
be loaded.
Access the COPY EXT-MEM menu using the key sequence
Select the "LOAD" option,
bank you wish to load using the
"ALL-DATA" so no action is required.
to start the data load. The legend "EXT-MEM LOADING !!" will be displayed with the
exclamation marks flashing to indicate that loading is in progress.
The load process will take over 20 seconds to complete. Once the load is complete, the AR8200
will power off/on and the LCD will revert to its previous display (VFO, scan or search etc).

18-6-3 EM8200 ALL-MEM save and load

It is not necessary to save and load all of the data at times when you do not wish your search banks etc
over-written. Instead use ALL-MEM to overwrite all memory banks in one go but to leave the search
banks etc unchanged.
Save ALL-MEM (all memory banks)
Access the COPY EXT-MEM menu using the key sequence
Select the "SAVE" option,
bank you wish to save using the
left of the "ALL-DATA" legend, use the
to start the memory data save. The legend "EXT-MEM SAVING !!" will be displayed
with the exclamation marks flashing to indicate that saving is in progress. The memory save process will
take over 10 seconds to complete. Once the save is complete, the LCD will revert to its previous display
(VFO, scan or search etc).
Load ALL-MEM (all memory banks)
It is presumed that you have already saved memory data to one of the four EM8200 memory locations.
Make sure that global write protect is not set or the data load will be unsuccessful and no data will be
loaded.
Access the COPY EXT-MEM menu using the key sequence
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3). The type of data will already be default to
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3).
keys to select "ALL-MEM".
the key to move the cursor to the
.
.
.