AOR AR8200 Manual page 79

Note: If a step-adjust value is already programmed into the search bank, the step-adjust
menu will be automatically displayed when accessing the step input menu.
STEP ADJ+ If you with to manually enter a step-adjust value for tracking unusual band plans
, the "STEP ADJ+" legend will be displayed.
to the "ADJ+" line and enter a step-adjust value using kHz format (do not push enter). You can
use the key in this menu to move back to STEP size selection.
Note: Step-adjust value will be calculated automatically by the AR8200 if a manual entry is
not made. The CPU calculates if the selected tuning step size is divisible into the search bank
start and end frequency limits and sets step-adjust accordingly.
to access the TEXT INPUT menu.
to access the PROTECT menu.
Alternatively
LCD will revert to its previous display (VFO, search or scan mode).
To start SEARCH
keys or keypad to select search bank.
The attenuator, noise limiter or AFC can be toggled
on/off during the search process.
TEXT The cursor will be positioned in the bottom left corner of the
LCD. If an unwanted text comment exists
delete the character
highlighted by the cursor
and the remainder of the line
to the right of the cursor
position. Add text if you
wish.
PROTECT It is possible to protect a search bank to prevent
accidental over-writing of data.
write protect status on/off (default is off).
To accept the data input
to return to the top of the menu or
, use the
Section 8-4
to move the cursor
to
to toggle the
.
to abort. The
79