Configuring The Audio Output - DisplayLink USB Graphics User Manual

1. Click on the Audio tab
2. Under Sound Playback, select the USB Audio Device. This changes the default sound output to the DisplayLink
audio device
3. Under Sound Recording, select the USB Audio Device. This changes the default recording inout to the
DisplayLink audio device.
4. Click OK to apply the changes and close the window.
It may be necessary to restart applications using audio to force them to use the new default audio output.
9.2.2.

Configuring the audio output

To configure the audio output to match your speaker setup
1. Open the Audio setup from the DisplayLink UI
2. Click on the Audio tab
3. Under Sound Playback, select the USB Audio Device. This changes the default sound output to the DisplayLink
audio device
4. Click Advanced
5. Under the Speaker Setup, select your speaker configuration from the dropdown
© DisplayLink 2013 – Issue 1
DisplayLink USB Graphics User Manual
Software Version 7.4
Page
39