Table of Contents
Advertisement
6. Configuring DisplayLink Ethernet
Products based on the DL-3900 and DL-3700 can include gigabit Ethernet from DisplayLink.
The Ethernet connection supports 10MB, 100MB or Gigabit Ethernet in full duplex. These speeds will be auto
negotiated.
Half duplex connections, eg to network hubs, are not supported. Network speeds will be very slow when using the
DisplayLink Ethernet connection at half duplex.
There are Ethernet features that can be configured. The screenshots below show the configuration on Windows 7,
however the configuration is the same for all other Windows versions.
Note: it is unlikely you will need to configure any of these settings in a home environment. Contact your administrator
to find out if you need to configure any of the settings in this section.
6.1.
Opening Advanced Ethernet features
On Windows 8, Windows 7 or Windows Vista, type ncpa.cpl into the Start menu search box:
On Windows XP, from the Start button, select Connect To -> Show all connections
The Network Connections window opens. Locate the DisplayLink USB Gigabit Network:
Right click on the icon and choose Properties, then select Configure...
© DisplayLink 2013 – Issue 1
DisplayLink USB Graphics User Manual
Software Version 7.4
Page
26
Advertisement
Table of Contents
