Table of Contents
Advertisement
On Windows 7 and Windows 8 VLAN Tagging will also need to be enabled under the Priority and Vlan menu. This
option is not available on Windows XP or Windows Vista:
Click OK to apply the change
6.5.
Configuring Wake on Lan
Wake on Lan is enabled and disabled under the Power Management tab:
To enable Wake on LAN, which will wake the computer on Link Up and Magic packet, check the box to Allow this
device to wake the computer.
© DisplayLink 2013 – Issue 1
DisplayLink USB Graphics User Manual
Software Version 7.4
Page
29
Advertisement
Table of Contents
