Table of Contents
Advertisement
6.3.
Configuring the link speed
The link speed can be set Auto negotiate (default), to 100Mbps Full duplex or 1Gbps full duplex. Half duplex speeds
are not supported. 10Mbps full duplex is supported by auto negotiation only.
6.4.
Configuring the adapter VLAN ID
The VLAN tag can be set. By default the VLAN tag is set to 0, which will transmit all packets untagged. The VLAN tag
can be between 1 and 4095.
© DisplayLink 2013 – Issue 1
DisplayLink USB Graphics User Manual
Software Version 7.4
Page
28
Advertisement
Table of Contents
