Settings Menu; Machine Settings - Pfaff IEC/EN 60335-2-28 Owner's Manual

Settings menu

In the Settings menu, you can change default
settings and make manual adjustments to the
machine settings (A), screen and light settings (B)
and sound settings (C).
Touch the icons to activate a function or open a list
of choices. The settings are saved even after turning
off the machine with two exceptions: Dynamic
spring foot 6D is always active at power on, and for
Options for feed dogs the default setting is auto.
Use Quick help to receive instant information about
the settings. Touch the Quick help icon (D) and then
the setting you want information about. Read more
about Quick Help on page 3:16.
Machine settings (A)
Language
Touch the icon to view the available languages. Select
your desired language from the list by touching it.
Owner's name
Touch the icon to get a pop-up where you can enter
your name.
Thread manufacturer
Touch to select preferred thread manufacturer. You
can select between Gütermann Sulky and Robison-
Anton. Color codes from the selected manufacturer
will be used when changing colors in a design, or
creating a new design from stitches or fonts in your
machine.
Note: Changing thread manufacturer setting will not
automatically convert the colors in existing designs to the
selected thread manufacturer.
Twin needle
Touch the icon to open a list for twin needle width
selections. When a twin needle size is selected, the
width of all stitches is limited for that needle size to
prevent needle breakage. The setting is kept until
you deselect the twin needle width.
When a twin needle size is selected, a pop-up is
shown when turning on your machine. Another
warning pop-up is shown when selecting a stitch
that is too wide for the set twin needle size. The
stitch width of those stitches is automatically
adjusted to t the twin needle. Deselect twin needle
to go back to normal sewing.
Pop-up for twin
needle selection.
A B C D
3:9