Embroidery Stitch Editor - Pfaff IEC/EN 60335-2-28 Owner's Manual

Embroidery stitch editor (28)

Sequences and stitches can be adjusted in
Embroidery stitch editor. You can also adjust
your own created sequence or stitch, loaded to
Embroidery edit (see chapter 5 and 6).
Note: When a stitch or a sequence is loaded into
Embroidery edit, tie-offs are automatically inserted at
the beginning and at the end. The tie-offs are only visible
when you open the stitch or sequence in sequencing.
You can activate the grid in Embroidery edit to
be able to join the stitches with precision. Enter
embroidery stitch editor to adjust your sequence or
stitch.
Adjust stitches
Open Embroidery stitch editor to adjust the stitches.
The adjustments will affect the stitch just like they
do in sewing mode. If more than one sequence is
inserted, you can toggle between them using the
arrows (A).
Use the + and - icons to increase or decrease the
stitch width (C) and stitch length (D).
Density (E) can be changed if satin stitches are
inserted.
8:20
3
28
B C D E
Decrease width of the selected stitch
Decrease length of the selected stitch
A