Pfaff IEC/EN 60335-2-28 Owner's Manual page 123

When mirroring (B), the stitch will be mirrored
within its own area. It will not affect the position of
the stitch like when mirroring is used in Embroidery
edit.
You can also use the touch functions to make
adjustments. The selected stitch will be affected as if
it was a design.
Note: If you make adjustments to a sequence or stitch in
Embroidery stitch editor, you can still use sequencing or
Stitch Creator to modify it.
When returning to Embroidery edit, the sequence or
stitch will be replaced by the adjusted one.
Embroidery stitch editor - example
1. Enter Embroidery edit.
2. To create a sequence, open sequencing by
touching the icon on the option bar (30). Select
stitch number 4.3.30, then 4.3.17, 4.2.2, 4.3.17.
Mirror the last inserted stitch end to end. Insert
stitch 4.3.26, 4.3.17, 4.2.2, 4.3.17. Mirror the last
inserted stitch and nally add stitch 4.3.30.
3. Close sequencing by touching OK in the
top right corner. The sequence is loaded to
Embroidery edit.
Mirroring the selected stitch side to side
Mirroring the selected stitch end to end
30
8:21