Quick Reference For Network-Related Settings - IBM Types 2193 User Manual

Quick reference for network-related settings

Some models come with an Ethernet adapter. The following instructions
are guidelines to help you if your computer is using an Ethernet adapter to
network with other computers.
The following tables are not intended to help determine which settings to
choose. They are only intended to help you quickly find the steps
necessary to get to the choices for specific network settings. You can then
view the current setting or select a different setting. When finished, you
can either save the settings and exit the utility program or exit without
saving the settings.
The steps in the following tables always start at the Configuration/Setup
Utility program main menu.
Table 3 (Page 1 of 4). Network-related settings
To configure:
Remote
Administration
Ethernet
adapter
Automatic
Power On
Startup
Sequence
16
Type 2194 and 6345 Information Update
Select:
1. System Security
2. Remote Administration
3. Enabled or Disabled
1. Start options
2. Network Setup
3. Network boot F12
option
4. Enabled or Disabled
1. Start Options
2. Startup Sequence
3. Automatic Power On
Startup Sequence
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Select the first, second,
third, and fourth
startup devices.
Comments:
Enable Remote
Administration to allow
POST/BIOS updates over
the LAN.
You might not be able to
select four startup devices
for your model.