System Set Up; Attaching Speakers; Bios Setup Configuration - IBM Types 2193 User Manual

System set up

The location of the connectors on your computer varies slightly from what
is shown in the setup poster. Refer to the following figure for the
arrangement of the connectors on the back of your computer.
1
2
1

Attaching speakers

Only powered speakers can be used on these models. If speakers were
supplied with your computer, follow the instructions that come with the
speakers to attach them to your computer. In addition to controlling the
speaker volume with the software volume-control program, as described in
the User Guide, you can also use the volume control available on most
powered speakers.

BIOS Setup configuration

The following information replaces the BIOS Setup configuration
information in "Chapter 6. BIOS Setup configuration" and elsewhere in
your computer User Guide.
The Configuration/Setup Utility program is stored in the electrically
erasable programmable read-only memory (EEPROM) of your computer.
Using this program, you can view and change the configuration settings of
your computer regardless of which operating system you are using. (Note
that the settings you select using your operating system might override any
similar settings in the Configuration/Setup Utility program.)
2
Type 2194 and 6345 Information Update