IBM Types 2193 User Manual page 212

Table 3 (Page 2 of 4). Network-related settings
To configure:
Wake on LAN
Wake on PCI
Select:
1. Power Management
2. Automatic Power On
3. PCI Wake Up and
press Enter.
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. Startup Sequence
9. The first, second, third,
and fourth primary
startup devices
10. Automatic Power On
Startup Sequence
11. The first, second, third,
and fourth startup
devices
1. Power Management
2. Automatic Power On
3. PCI Wake Up and
press Enter.
4. Enabled or Disabled.
If you select Enabled,
continue to the next
step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. Startup Sequence
9. The first, second, third,
and fourth primary
startup devices
10. Automatic Power On
Startup Sequence
11. The first, second, third,
and fourth startup
devices
Comments:
You might not be able to
select four startup devices
for your model.
You might not be able to
select four startup devices
for your model.
About this update
17