Adding And Replacing System Board Components; Identifying System Board Components; Replacing The Battery - IBM Types 2193 User Manual

Adding and replacing system board components

Refer to the following information when you add or replace system board
components, such as memory connectors, the computer battery or need to
locate other components on the system board.

Identifying system board components

The following figure replaces the figures of the Type 2194 and 6345 system
board in "Chapter 9. Adding and Replacing system board components" of
the User Guide.
1
PCI adapter card connectors
2
CD-ROM audio signal
connector
3
Processor fan power connector
4
Power supply connector
5
Memory module sockets

Replacing the battery

If the battery needs to be replaced, remove it by pressing outward on the
metal clip.
3 2 1
IDE 2
IDE 1
DIMM 1
DIMM 2
6
Diskette drive connector
7
IDE connectors
8
Battery
9
Clear CMOS/recovery jumper
About this update
19