Gt02/Gt02L (5 V Dc) - Panasonic GT01 User Manual

3.4.2 GT02/GT02L (5 V DC)

RS232C type
Perform wiring and placement of the cable so that there is no impression of external noise on the cable
-
and no induction.
Use shielded wires for distribution cables.
-
(Recommended cable: AIGT8142)
It conforms to CE marking. As conditions, the following wiring is required.
-
1.Perform grounding of the cable shield.
2.Perform grounding of the GT.
GT02
RS422 (RS485) type
There is no RS and CS (control lines).
-
Perform wiring and placement of the cable so that there is no impression of external noise on the cable
-
and no induction.
Use shielded wires for distribution cables.
-
When using shielded cable with crossover wiring for the RS485 transmission line, grounded one end.
-
"E" is used to set the terminating station.
-
It conforms to CE marking. As conditions, the following wiring is required.
-
1.Perform grounding of the cable shield.
2.Perform grounding of the GT.
GT02
Key Point:
The CE marking standards that the GT02/GT02L conforms to
European EMC directive 2004/108/EC
European EMC standards (EN61131-2)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
GT02L
GT02L
3-15