Panasonic GT01 User Manual page 57

Static electricity
Do not touch connector pins directly to prevent static electricity from causing damage.
-
Always rid yourself of any static electricity before handling this product.
-
If excessive estatic electricity is applied to the panel surface, the LCD panel may be damaged.
-
Power supply
Twist the wires of the power supply.
-
The unit has sufficient noise immunity against the noise generated on the power line. However, it is
-
recommended to take measures for reducing noise such as using an isolating transformer before
supplying the power. And it is recommended to take measures such as installing a ferrite core.
Allocate an independent wiring for each power supplying line, PLC etc and operating device.
-
If using a power supply withoug a protective circuit, power should be supplied through a protective
-
element such as fuse. Directly applying an abnormal voltage to the unit may cause the damage to the
internal circuit.
Touch switches
Always operate the touch switch with fingers. As the touch switch may be damaged due to the
-
excessive load or shock (caused when being operated with any tools), the touch switch should be
operated within the specified control force. Also, if the touch swich is pressed like kneading, the
electrode may be worn out exceptionally, and cause the malfunction. Operate with a single touch of
the switch.
The touch position may shift due to aging variation. If the touch position has shifted, please adjust it.
-
LCD panel
Do not drop or have a strong impact on the programmable display unit as glass is used for the LCD
-
panel.
The liquid in the LCD panel is a hazardous substance. If the LCD panel is broken, do not put the leaked
-
crystalline liquid into your mouse. Should it get into your mouse, immediately gargle, and consult a
doctor. If it adheres to your skin or clothes, wash it away with soap.
There is a case that shadows appear in the place on the screen of the GT where no graphic or part is
-
arranged. (The shadows appear as the extension of the characters, graphics or parts actually being
displayed.) This is a phenomenon resulting from the basic characteristics of liquid crystal devices, and
called cross talk.
Exposing the product to direct sunlight increases the surface temperature of the display higher than
-
ambient temperature, and causes deterioration of LDC panel. Screen the product from the sun.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
3-3