Restriction According To Mounting Directions; Installation Space; Ul/C-Ul Qualification - Panasonic GT01 User Manual

3.1.2 Restriction According to Mounting Directions

If the unit is being installed in a horizontal orientation, or our Programmer II and C-NET adaptor are
being connected to the TOOL port, note that the ambient usage temperature should be as below.
Model
Condition
name
Vertically installed
Programmger II
GT11
C-NET adapter
Horizontally installed
Programmer II
GT21
C-NET adapter
Horizontally installed
GT32
Horizontally installed
GT32-E
Note) When installing the unit aslant, the restriction is the same as the one when installing horizontally.

3.1.3 Installation Space

Applicable panel thickness
A panel with a thickness of 1.0 to 5.0 mm should be used.
Clearance when the GT is installed
When installing the GT unit, if other parts are being installed to the panel or cables are being wired to it,
we recommend providing a clearance around the GT unit. This prevents cables from being damaged,
and facilitates the installation work. Also, make sure that the slits in the main unit are never obstructed.
Model name
GT01
GT11
GT21
30 mm or more
GT02L
(50 mm or more
GT02
GT05
GT12
GT32
GT32-E
* It should be 40 mm or more when using a SD memory card.

3.1.4 UL/c-UL Qualification

Be aware of the following when applying for UL standard for the equipment that the GT has been
built in.
 When the GT built in equipment, the GT should meet the standard as a part of the enclosure.
 As the rear of the GT is not qualified as an enclosure, provide a fire enclosure (metal barrier) that
entirely covers the rear and lateral sides of the GT.
3-4
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Ambient
temperature
0 to 45 C
0 to 40 C
-20 to 55 C
Clearance on the surface
Clearance to connect the screen
recommended)
transfer cable
20 mm
60 mm
60 mm
Clearance on the
mounting surface when
using a SD memory card
-
-
40 mm or more