Gt32; General Specifications (Gt32) - Panasonic GT01 User Manual

6.8 GT32

6.8.1 General Specifications (GT32)

Item
Rated voltage
Operating voltage range
Power consumption
Insulation method of
power supply part
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Note2)
Breakdown voltage
Insulation resistance
Note2)
Vibration resistance
Shock resistance
EC Directive applicable
Noise immunity
Protective construction
Weight
Note1) When it is installed in a horizontal orientation (installed to make the liquid crystal face be topside),
the usable range is 0 to +40 °C.
Note2) Not isolated between the USB port, COM port, Ethernet port (GT32T1 only) and the internal
digital circuit.
Note3) When using our exclusive cable.
Note4) When reattaching, replace waterproof packing.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
GT32M
24 V DC
21.6 to 26.4 V DC
10 W or less (410 mA or less)
Transformer insulation
Note1)
0 to +50 °C
20 to 85% RH (at 25 °C, non-condensing)
-20 to +60 °C
10 to 85% RH (at 25 °C, non-condensing)
Between [power supply terminals] and [case]
500 V AC for 1 minute, Cutoff current 10mA (at default setting)
Between [power supply terminals] and [case]
100 MΩ or more, 500 V DC, measured with megohmmeter (at default
setting)
10 to 55 Hz (1-minute cycle), Amplitude: 0.75 mm, 10 min on 3 axes
2
98 m/s , 4 times on 3 axes
EN61131-2 (EMC Directive)
1000 V [P-P] or more, Pulse width 50 ns, 1µs between power supply
terminals (based on in-house measurements)
IP65 (Initial value, evaluated by us)
Dustproof and drip-proof from front panel only (packing used on panel
Note4)
contact surface)
Approx. 500 g Approx. 470 g
Specifications
GT32T0
12 W or less (500 mA or less)
Note3)
Approx. 480 g
GT32T1